Danner 02522 Pondmaster 250GPH Pump
March 9, 2010 | Posted by elvin 
- Made to run continuously without seals to wear out
- Filled with epoxy instead of oil, so you never need to worry about a leak
- Highly energy efficient and will potentially save hundreds of dollars
- Cycles 250 gallons per hour and includes a prefilter and 18 foot long cord
- Will run quietly and faithfully while operating your water feature
Product Description
This magnetic drive pump by Danner is made to run continuously without seals to wear out. The pump is filled with epoxy instead of oil, so you never need to worry about a leak. You’ll always know that your plants and animals are safe. U.L. listed to Unite
Danner 02522 Pondmaster 250GPH Pump
Categories: Pet Fountain | 
Tags: 02522, 250gph, Danner, Pondmaster, PUMP | 
2 Comments »
Upgraded water fountain using this one as an external pump – works fantastic! Plenty of power, whisper quiet, long power cord. Solid build
Makes fountain maintenance (have multi level fountain with originally submerged pump at lowest level) now a real pleasure – just pull hose from pump and let drain into garden. Can’t get any easier.
Be aware this pump comes with no fittings, so you will need to plan trip to a hardware store. Both ends threaded (male & female), so very easy. Buy 2 fittings, 2 hose clams, attach hoses and you’re done. Used Epoxy to seal entry/exit point to/from fountain. Works flawless overall.
Rating: 4 / 5
I didn’t get a Danner Larger Utility Pump that was pictured. I got a MD2, which is just as good and a direct replacement. It would have been a bonus to get the actual product pictured.
The MD2 is powerful and quiet. My first one lasted 3-4 years before it died from poor maintenance on my part. Never run any pump with restrictive plumbing, like clogged filters.
I’m sure this unit will run 4+ years.
Rating: 5 / 5